China CNC Machine Stainless Steel Round Gear Rack &AMP plastic gear rack

Product Description

 CNC Machine Stainless Steel Round Gear Rack & Pinion M0.5 M1 M2 M3 M4 M5 M6 M8

Our CNC steel gear rack, cnc gear racks ,spur gear rack, stainless steel gear rack,  special gear rack, aluminum gear rack, round gear rack, gear and racks, gear rack M4 gear racks, gear racks M1 , rack and pinion steering gear are exported in big quantity to Europe,America, Australia, Brasil,South Africa, Russia etc. There is standard gear racks available and also special gear rack as per your drawing or samples. Standard or special gear racks produced by  CNC machines

Specifications

Material of Big gear wheel: ZG35SiMn, ZG35CrMo, ZG42CrMo, or Alloy Steel, Carbon Steel as per ASTM, BS, IS, AISI

Big gear wheel is manufactured in Segments. A large metal gear wheel is divided into 8-16 segments, which are joined by

bolts. The segment length typically varies between 0.8-1.6M. Short segments are usually used for versatile precision machines.

Big gear wheel is extensively used in most of the mills and kiln drive system. A large metal gear wheel is 1 of the highest

cost components in the entire drive assembly and has a very big diameter with high precision finish. The large metal gear

wheel has a high efficiency and its overall life depends upon the proper lubrication and alignment.

Manufacturing Capacity: Outside diameter from 1,000mm to 14,000mm . Unit weight max. reaches 300 tons.

Heat treatment: Excellent heat treatment is available.

Machining:  The large metal gear wheel is machined by advanced equipments.

Quality control:  We have a mature QCP control system for guarantee excellent quality.

Inspection: NDE/NDT, UT, RT, PT are available.

 

 OUR SERVICE:

1) Competitive price and good quality

2) Used for transmission systems.

3) Excellent performance, long using life

4) Could be  developed according to your drawings or data sheet

5) Pakaging:follow the customers’ requirements or as our usual package

6) Brand name: per every customer’s requirement.

7) Flexible minimum order quantity

8) Sample can be supplied

 

MAIN PRODUCTS:

1) Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate;

2) Forging, Casting, Stampling Part;

3) V Belt Pulley and Taper Lock Bush; Sprocket, Idler and Plate Wheel;Spur Gear, Bevel Gear, Rack; 

4) Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.;

5) Shaft Coupling:including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling,              Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint; 

6) Shaft Collars: including Setscrew Type, Single Split and Double Splits;

7) Timing Belt: including Rubber and PU timing belts for industrial;

8) Other customized Machining Parts according to drawings (OEM).

Company Information
ZheJiang Mighty Machinery Co., Ltd. specializes in manufacturing Mechanical Power Transmission Products.
We Mighty is the division/branch of SCMC Group, which is a wholly state-owned company, established in 1980.
About Mighty:
-3 manufacturing factories, we have 5 technical staff, our FTY have strong capacity for design and process design, and more than
70 workers and double shift eveyday.
-Large quality of various material purchase and stock in warhouse which ensure the low cost for the material and production in
time.
-Strick quality control are apply in the whole prodution. we have incoming inspection,process inspection and final production
inspection which can ensure the perfect of the goods quality.
-14 years of machining experience. Long time cooperate with the Global Buyer, make us easy to understand the csutomer and handle the export.
MIGHTY’s products are mainly exported to Europe, America and the Middle East market. With the top-ranking management, professional technical support and abundant export experience, MIGHTY has established lasting and stable business partnership with many world famous companies and has got good reputation from worldwide customers in international sales.

 

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory, also do trading company business. Because our company do export 36years, having our own factories, also cooperated with other many factories.

 

Q:What’s the MOQ?

A:We have not a clear limit,1 or 2pcs is available.

 

Q: How long is your delivery time?

A: 3-5 days via DHL, TNT, UPS, FEDEX. 

Diffirent based on the diffirent countries of customers via CZPT shipping.

 

Q: Do you provide samples ? is it free or extra ?

A:yes,we provide free samples for checking the build quality and real performance of our products,the freight need to be covered by customer.

 

Q: What is your terms of payment ?

A: T/T, Paypal, L/C, D/P, D/A, Western Union, etc., all decided by customer’s requirements.

 

Standard or Nonstandard: Standard
Feature: Anti-Static, Oil-Resistant, Cold-Resistant, Heat-Resistant, Skid-Resistance, Acid-Resistant, High Temperature-Resistance
Application: Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Marine, Mining Equipment, Agricultural Machinery
Surface Treatment: as Require
Material: Plastic, Brass / Aluminum / C45, Brass / Aluminum
Model Number: Gear Rack M0.5 M1 M2 M3 M4 M5 M6 M8

###

Samples:
US$ 3.6/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Standard or Nonstandard: Standard
Feature: Anti-Static, Oil-Resistant, Cold-Resistant, Heat-Resistant, Skid-Resistance, Acid-Resistant, High Temperature-Resistance
Application: Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Marine, Mining Equipment, Agricultural Machinery
Surface Treatment: as Require
Material: Plastic, Brass / Aluminum / C45, Brass / Aluminum
Model Number: Gear Rack M0.5 M1 M2 M3 M4 M5 M6 M8

###

Samples:
US$ 3.6/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Types of Bevel Gears

Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.
gear

Spiral bevel gear

Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.

Straight bevel gear

Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.
gear

Hypoid bevel gear

Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.

Addendum and dedendum angles

The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.
gear

Applications of bevel gears

Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.

China CNC Machine Stainless Steel Round Gear Rack &AMP     plastic gear rackChina CNC Machine Stainless Steel Round Gear Rack &AMP     plastic gear rack
editor by czh

Recent Posts

gear rack

As one of leading spur gears manufacturers, suppliers and exporters of products, We offer gear rack and many other products.

Please contact us for details.

Mail:gear-rack.top

Manufacturer supplier exporter of gear rack